Skip to main content
Product group
Description

These tables provide the number of housing completions by dwelling type and market type. See the Notes below for dwelling type and market type definitions. 

Included in the file package are data for CSD, MET, Neighbourhood and Zone geographies. The latter three levels of geography are defined as follows: 

  • MET: Metropolitan area boundaries correspond to CMAs, CAs, or CSDs with a population of 10,000+ people as defined by Statistics Canada. This is updated annually based on population fluctuations.
  • Neighbourhood: Neighbourhoods are made up of CMHC-defined census tracts (which match Statistics Canada census tracts for the most part) and cannot cross zone boundaries.
  • Zone: Zones are primarily made up of one or many Statistics Canada Census Tract (CT) boundaries. Zone boundaries respect CT boundaries
Notes

These notes are taken from the Methodology Notes for the CMHC Starts and Completions Survey

The Starts and Completions Survey is conducted by way of site visits which are used to confirm that new units have reached set stages in the construction process. Since most municipalities in the country issue building permits, these are used as an indication of where construction is likely to take place. In areas where there are no permits, reliance has to be placed either on local sources or searching procedures.

The Starts and Completions Survey is carried out monthly in urban areas with populations in excess of 50,000 as defined by the latest Census.

In urban areas with populations of 10,000 to 49,999, all starts are enumerated in the last month of each quarter (i.e. four times a year, in March, June, September and December). In these centres, completion activity is modeled based on historical patterns.

Monthly Starts and Completion activity in quarterly locations are statistically estimated at a provincial level for single and multi categories. Centres with populations below 10,000 are enumerated on a sample basis, also in the last month of each quarter (i.e. in March, June, September and December).

The Market Absorption Survey is carried out in conjunction with the Starts and Completions Survey, but is only conducted in urban areas with populations in excess of 50,000 and only for structures which are destined for the homeownership/condominium market. When a structure is recorded as completed, an update is also made as units are sold. The dwellings are then enumerated each month until such time as full absorption occurs. Sales prices are collected whenever possible. Builder-occupied units are marked as sold at completion and are no price is collected. Prices are only published when they would not result in the determination of individual responses provided.

The Starts and Completions Survey enumerates dwelling units in new structures only, designed for non-transient and year-round occupancy.

Dwelling Type Definitions:

A “Single-Detached” dwelling (also referred to as “Single”) is a building containing only one dwelling unit, which is completely separated on all sides from any other dwelling or structure. Includes link homes, where two units may share a common basement wall but are separated above grade. Also includes cluster-single developments.

A “Semi-Detached (Double)” dwelling (also referred to as “Semi”) is one of two dwellings located side-by-side in a building, adjoining no other structure and separated by a common or party wall extending from ground to roof.

A “Row (Townhouse)” dwelling is a one family dwelling unit in a row of three or more attached dwellings separated by a common or party wall extending from ground to roof.

The term “Apartment and other” includes all dwellings other than those described above, including structures commonly known as stacked townhouses, duplexes, triplexes, double duplexes and row duplexes.

Mobile homes are included in the surveys, where a mobile home is typically defined as a type of manufactured house that is completely assembled in a factory and then moved to a foundation before it is occupied.

Trailers or any other movable dwelling (the larger often referred to as a mobile home) with no permanent foundation are excluded from the survey.

Conversions and/or alterations within an existing structure are excluded from the surveys as are seasonal dwellings, such as: summer cottages, hunting and ski cabins, trailers and boat houses; and hostel accommodations, such as: hospitals, nursing homes, penal institutions, convents, monasteries, military and industrial camps, and collective types of accommodation such as: hotels, clubs, and lodging homes.

Intended Market Definitions:

The “intended market” is the tenure in which the unit is being marketed. This includes the following categories:

A Freehold unit is a residence where the owner owns the dwelling and lot outright.

A Condominium (including Strata-Titled) is an individual dwelling unit which is privately owned, but where the building and/or the land are collectively owned by all dwelling unit owners. A condominium is a form of ownership rather than a type of house.

A Rental unit is a dwelling constructed for rental purposes, regardless of who finances the structure.

Other Definitions:

Dwelling Unit
For purposes of the Starts and Completions Survey, a Dwelling Unit is defined as a structurally separate set of self-contained living premises with a private entrance from outside the building or from a common hall, lobby, or stairway inside the building. Such an entrance must be one that can be used without passing through another separate dwelling unit.

Start
For purposes of the Starts and Completions Survey, a Start is defined as the beginning of construction work on a building, usually when the concrete has been poured for the whole of the footing around the structure, or an equivalent stage where a basement will not be part of the structure.

Under Construction
Under Construction refers to the number of units under construction at the end of the period shown, and takes into account certain adjustments which are necessary for various reasons. For example, after a start on a dwelling has commenced construction may cease, or a structure, when completed, may contain more or fewer dwelling units than were reported at start.

Completion
For purposes of the Starts and Completions Survey, a Completion is defined as the stage at which all the proposed construction work on a dwelling unit has been performed, although under some circumstances a dwelling may be counted as completed where up to 10 per cent of the proposed work remains to be done.

Absorbed
An absorbed unit is a housing unit that has been sold and completed. A unit is considered sold when a binding contract is secured by a non-refundable deposit and has been signed by a qualified purchaser. The purpose of the Market Absorption Survey is to measure the rate at which units are sold after they are completed, as well as collect prices.

Years within data
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
File format
File Size
4.1 MB
Date released
Full title
Annual Housing Completions by Dwelling Type and Market Type